Since you now know the differences between the densities and what measurement device is required to linearize our film we go into the software and create a linearization.
If you are using the software with a valid dongle you are able to get to the linearization assistent like shown in the next picture.
Continue reading The Linearization Assistant – Part 2 : Linearization & MIM CreationFor printer drivers that “print” to files in an output folder (e.g. Industrial InkJet, PDF FLAT HIGH-RES), it might help to setup a new path for each hotfolder.
Continue reading Configuring output paths for specific hotfolders
In the ColorGATE Productionserver9 we have integrated the support of HP WallArt PDF files since Version 9.02 6196 for use with the HP Latex printer series.
Continue reading HP WallArt PDF files
Do you know our Print & Cut Module (PCM) and the ColorGATE CutServer? No?! Then this Blog is for you.
Continue reading ColorGATE Print&Cut Modul (PCM) and CutServerIn our Download area on our Support site you can find our profiler guides. The latest guide explains the Profiling process for printers using non standard inksets (Version 9).
Continue reading New Profiler guide – Profiling process using non standard inksetsMany smartphones and tablets are already offering full HD resolutions, but there are still notebooks and old displays are often still using maximum resoltion with heights under 1024 pixels. These do not reach the system requirements of Productionserver 9, but there’s still a possibility to show the Advanced Settings window fully in these cases.
Continue reading Adjusting the Advanced Settings window for monitor resolutions under 1280×1024
Take advantage of the combined strengths of Productionserver and Rasterlink.
Continue reading Productionserver RL-direct driver
ColorGATE Productionserver now offers the possibility of copying settings from one Hotfolder to another.
Continue reading Did you know: Loading settings from HotfolderSome users sometimes ask us the question: Which screening do I have to use to output spot color separations in the Screen workflow?
In principle, graphics that consist of solid colors, either CMYK or spot colors should not be calculated through color management or rastered again. Each color is to be output as a spot color separation.