We updated our step by step guides
We would like to inform you that we have recently updated our step by step guides to several modules and functions in Productionserver.
…
What to do when the software does not start anymore
Due to power failures and similar external influences, it can happen that the PC simply goes out while Productionserver is writing data. The next time the software tries to start, it may not open anymore. The reason for this is usually that a job folder is defective. The following article briefly.
…Logging in Productionserver
Normally logging is just something that just happens in the background when running a software, but when a problem comes up, it suddenly becomes more important. While working in Support we often check the log files of Productionserver. If for example a printing process is canceled or the software.
…JDF Interface Module (JDFM)
Do you know our JDF Interface Module? No?! Then this article contains more information about it.
…The Linearization Assistant – Part 2 : Linearization & MIM Creation
Since you now know the differences between the densities and what measurement device is required to linearize our film we go into the software and create a linearization. If you are using the software with a valid dongle you are able to get to the linearization assistent like shown in the next.
…Configuring output paths for specific hotfolders
For printer drivers that “print” to files in an output folder (e.g. Industrial InkJet, PDF FLAT HIGH-RES), it might help to setup a new path for each hotfolder.
…HP WallArt PDF files
In the ColorGATE Productionserver9 we have integrated the support of HP WallArt PDF files since Version 9.02 6196 for use with the HP Latex printer series.
…ColorGATE Print&Cut Modul (PCM) and CutServer
Do you know our Print & Cut Module (PCM) and the ColorGATE CutServer? No?! Then this Blog is for you.
…New Profiler guide – Profiling process using non standard inksets
In our Download area on our Support site you can find our profiler guides. The latest guide explains the Profiling process for printers using non standard inksets (Version 9).
…