Note: This article will be updated as new information becomes available.
For many years, Filmgate has been a reliable solution for high quality film printing, especially when used with a range of Epson printers. However, the market for these printers has changed significantly and many of the models that Filmgate was originally designed to support are no longer available. This article provides an update on the current state of Filmgate, the challenges posed by newer printer models, and our ongoing efforts to find suitable alternatives.
Legacy Printer Support
Filmgate has been compatible with several Epson printer series over the years:
- Epson SureColor SC-P60x0 Series / SC-P80x0 Series
- Epson SureColor SC-P70x0 Series / SC-P90x0 Series
- Epson SureColor SC-T32x0 Series / SC-T52x0 Series / SC-T72x0 Series
- Epson SureColor SC-P100x0 Series
- Epson SureColor SC-P200x0 Series
These models, along with Filmgate software, produced high-resolution prints with screen rulings up to 180 lpi (lines per inch) and resolutions up to 2880x2880 dpi. However, as these models are being phased out, finding replacements that meet the same standards has proven to be a challenge.
Current Challenges with Newer Printers
As we evaluate newer printer models, we've encountered several issues that affect their compatibility with Filmgate:
Epson SureColor SC-P7500/9500
- These models are among the last from Epson where it was possible to bypass the Epson Precision Dot processing and reach high resolution (2400x2400 dpi). However, they can only achieve screen rulings of up to 70 lpi, which falls short of the standards set by older models. Because of its special double head configuration, it does not match the precision offered previously.
Epson SureColor SC-P6500/8500
- Our tests on the SC-P8500 have been inconclusive so far. Although we were able to bypass the Epson Precision Dot processing, the output showed issues on our test device that require further testing.
Epson SureColor SC-T3700/5700/7700
- Initial third-party tests of the SC-T5700 showed promising results, although some artifacts were still present. We have ordered a unit for internal testing and will continue to evaluate its suitability for Filmgate.
Epson SureColor SC-T3400/5400
- The SC-T5400 is an interesting option as it has the ability to bypass Epson Precision Dot processing separation by sending data directly to the black channel. Initial prints looked promising, but the printer only uses matte black ink, which does not adhere well to film and smears on contact. This limitation makes it less suitable for high quality film printing.
Canon IPF TX-2100/3100/4100
- These Canon models allow direct printhead control, but the UV density achieved is currently insufficient for our needs (> 3.0), although we are experimenting with adding yellow ink to improve the results. Test films have been sent to a test user for further analysis.
Conclusion
The phase-out of older Epson printers has created significant challenges in maintaining the level of quality that Filmgate users have come to expect. While we are actively researching and testing newer printers from Epson and Canon, no current solution fully matches the capabilities of the older models. We are committed to continuing our rigorous testing and will provide updates as we identify and validate suitable alternatives for our users.
We appreciate your patience and understanding during this transition and remain committed to maintaining the high standards of print quality that Filmgate has always delivered.
If you know of a printer model that can meet the requirements for using Filmgate at the previous quality, please contact contact@colorgate.com.